The consumer unit in an annexe needed to be replaced.

It lacked RCD protection  and the SWA connection to a garden room had failed after 30 years.

After testing the circuits to confirm that the circuits were still OK to continue to be used the old board was removed and replaced with a small split RCD protected board. One side for the garden room feeding a swimming pool filter and air source pump, the other for lighting and socket circuits.

The old consumer unit with circuit tails showing ready to be removed
Old consumer unit removed and circuit tails ready for the new install
New SWA cable being fed in for supply to garden room
SWA cable feed in in and ready to go
New consumer unit ready to install
New consumer unit on the wall with all circuit tails ready to connect
New consumer unit on the wall with all circuits tails ready to connect
New consumer unit with MCBs connected to each circuit ready for testing
The SWA cable termination connectors and cober