-
-
-
-
Electrical Fails - Melting plugs
Melting plugs and sheaths on wires happen more often than you might realise.
Poorly terminated wires explain some of them but more often it is due to DIY installations combined with excessive loads being used on the socket.
The first melted plug was connected via a long extension to an outbuiding where the small Consumer unit pitcured was wired directly to it. Multiple freezers were running from it. This really was a fire waiting to happen.
The outdoor socket in the third image shows the sheath melting from the temperatures being reached in the copper cable. The sockets were being used to power extension leads running various outdoor heaters. Again luck was all that had prevented a fire.
Look at the socket calculator here to check whether you're over stressing your cabling and sockets.
-
Electrical Fails - Outdoor Power
We were told that the lighting for the garden hadn't worked for a long time and the pump for a similar time. Can we take a look.
This is what we found shortly after arriving - granted it was under a car port which was watertight but still...
An indoor fused control unit (FCU) with SWA - the thick black cable - which had been terminated but was hanging from the terminations in the FCU. Various other electrical connections had been attempted unsuccessfully.
Everything was taken out and made safe to be re-installed properly at a later date.
-
Garden Outbuilding Upgrades
Upgrade to a make do and mend installation including many extensions and hardwired extension leads, and an extension to an adjacent toilet block.
The consumer unit required new connections to the MCBs as wire had been used in place of it.
The toilet block having fused control units to lights and the installed water heater.
-
-